Fast Charging with USB C Fast Charger Explained

Everything You Need to Know About Fast Charging with USB C Fast Charger

Many smartphones have come into the market over the last few years. All these smartphones are capable of fast charging and therefore come with a quick charger such as a USB C fast charger. So, those of you who think that fast charging is a gimmick or an upsell, it is not. In fact, it is a real thing! While the types of tech used by manufacturers vary, USB Type C and USB PD are the most common ones out there. In this article, we will tell you everything you need to know about how fast charging works. Stay tuned!

 

Phone Chargers in General

Before we dive into the details about how a USB C fast charger works, let us first talk a bit about phone chargers in general. When the users plug their phones into the charger that came with their device, some amount of power starts generating from the outlet. It passes through the charger and then reaches the smartphone. There is a built-in regulator in the smartphones that prevent the charger from sending too much power to the phone and damaging it. So, in short, the time in which your phone charges is somehow limited by what the internal regulator allows. As different smartphones have different internal regulators, their charging capacity is different from each other too.

The charger that arrives with your smartphone device is most certainly rated compatible with the device. However, if you charge your phone with any other charger, your phone might charge slower. That’s because it is not capable of putting out enough power to the device. Let’s take the example of Apple’s iPad charger here. This charger offers 2.1 amps at 5V. But, a typical USB port charger is only capable of charging between 0.5 to 1.5 amps. So, if your phone can handle anything that is above 1.5 amps, it will result in slow charging with a USB port as compared to the charger it originally came with. However, some chargers can still fill your device’s battery faster than others. That’s where a USB C fast charger steps in.

How Does a USB C Fast Charger Work?

When you are charging your device with a USB C fast charger, what you are actually doing is opening the door a bit wider to let more power enter your smartphone. As we discussed earlier, the regulator inside the phone limits the amount of power that can enter into it. So, the devices that are capable of fast charging allow a bit more power than the typical chargers. The best part is that they do all of this without damaging their phone’s battery.

So, if you want to take the advantage of the USB C fast charger, you must have a device capable of supporting the fast charging feature. That’s because if you try to charge your smartphone with a fast charger and it does not support the fast charging feature, the regulator present inside will prevent it from charging the battery. Even though it will not harm your device but you still will not be able to charge it faster.

Secondly, it also indicates the fact that you might need to buy a special charger that goes with your device. An important thing to note here is that all the chargers that you use are not compatible with fast charging. So, in this case, you should get the charger with the higher output. However, you should keep in mind that if you are not using your phone’s battery to its full capacity, it does not mean that your phone will not charge. It will only take a little bit extra time which is not a bad thing.

Dos and Don’ts of Charging Your Phone with the USB C Fast Charger

Even though the USB C fast charger offers extra power in a short time, there are some dos and don’ts that you need to consider. These factors will ensure that your device does not get damaged in any way. Let’s take a look at them below.

1. Don’t Let Your Device’s Battery Come to Zero

A lot of people are unaware of the fact that their device is equipped with a helium battery. These batteries no longer have the memory effect that the traditional batteries used to have. This means if the battery drains down to zero, your device’s battery capacity will diminish by a great deal. So, in case your smartphone or any other device is nearing zero, you should plug it in to charge immediately. In case you do not have a charger, you must turn it off before the battery is fully depleted.

2. Do Unplug Your Device After It Is Fully Charged

We all know how important it is to keep our devices’ batteries to 100%. However, what we do not realize is that it places more stress on the battery. This can even impact the overall lifespan of the battery. So, once your phone or tablet hits 100%, you should immediately take it off the charge. Otherwise, your battery will be constantly in a high-tension state and as a result, will wear down.

3. Don’t Charge Your Device Overnight

While the majority of smartphones nowadays stop charging when the device reaches 100%, it is still advisable not to charge your phone overnight. That’s because the lithium battery present in the devices nowadays start losing their capacity with every charging cycle. This is one of the major reasons that the users start noticing a major degradation in their battery after some time of use.

4. Do Plug Your Device in Whenever Possible

When you charge your device occasionally throughout the day, it will keep the battery’s performance optimum. For this reason, we would suggest charging your battery whenever it loses 10% of its life.

 

Final Words

Well, this was your comprehensive guide on how fast charging works with a USB C fast charger. However, make sure that you also the dos and don’ts mentioned above. This will ensure that your device’s battery life will always stay optimum. Need more information on fast charging? Contact us now!